Sheet connector in copper
Formated with copper bare the thickness 0,10 or 0,30 mm. are connected with pressing and riveting them together for the needed shape. connected areas are additionally strengthened with thicker copper sheets. there are manufacture up to 5,000 mm². Is possible insulated with different material.
Copper bare steels (Cu-ETP) according to standard UNE-EN 13599.
|Conditions Cu||Annealed electrolytic|
|Resistance a 20ºC||1,7241 μΩ.cm|
|Conductivity||58 (100 % IACS)|
|Load break||>200 MPa|
These kinds of connectors are mainly used where you need two-dimensional movements, greater current transfer, and resistance against heat such as welding guns and machines.
These types are specially manufactured according to your designs and drawings.